ALARM LOCK AL-PC12 DRIVER DOWNLOAD

Confirm the new "Netpanel" version number located on the Lock Status screen. Then in the Setup folder, run " Setup. Plug in the provided male shunt connector into the yellow wire female connector. Also includes other updated keypad programming features. Firmware for Gateway V3. Supports Version 2 Gateways and Expanders.

Uploader:	Douktilar
Date Added:	19 September 2005
File Size:	5.43 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	18791
Price:	Free* [*Free Regsitration Required]

Visit Our Other Sites. Supports Version 2 Gateways and Expanders and the Emergency Indicator Lightbar on the inside "protected" side of the door.

AL-PCI2-U Alarm Lock USB Computer Interface w/ Software

In this situation, simply request another Gateway Status update from the Gateway Configuration Tools menu and manually verify the correct 'updated' firmware version 3. Failure to perform these tasks may cause improper device operation. If following the valid "access granted" indication you then zlarm 1 long beep and 5 short beeps, the lock must then be defaulted, re-discovered and the lock profile re-downloaded.

Verify that the red LED flashes "1 short blink" indicates version e. Gateway Firmware for V3. In the Open screen, navigate to the folder on your computer containing the downloaded.

Software | Napco Security Technologies

Therefore, after defaulting the lock simply re-discover the lock and DL-Windows will manage the "re-configuration process". If your Gateway is already running version 3. Software - DL-Windows V4.

After updating the firmware: Delete the DL Windows directory, then install the locm version.

At the back of the lock, remove the lock housing screw and remove the cover. This version is a BETA release. Upon updating the Gateway firmware to version 3. Software - DL-Windows V3. Rest assured that your Gateway always maintains your lock information.

After 10 seconds, remove the short. Accompanying the DL-Windows 5. When finished, the confirmation screen displays the slarm firmware.

In addition, this firmware supports DL-Windows "Manually Unlock Door" right-click menu option available in versions greater than 5.

Be aware that both types of lofk always denote the same version. The firmware will begin to install. Please carefully follow the accompanying README file containing instructions for the installation of the patch file after unzipping the contents of the folder.

Also includes other updated keypad programming features. Next, Extract All of the contents of the WinZip file to the same or alram newly created folder location again, be sure to " Extract All ".

Confirm the new "Netpanel" version number located on the Lock Status screen. Within 10 minutes of the previously described update process, press and hold the "1" key on the keypad for 10 seconds and listen for a short beep followed by a long beep. In rare cases, DL-Windows 4.

Alarm Lock ALPCI2 Trilogy PC Software & Cable

Backup your database, then uninstall all previous versions of DL Windows. Select the correct driver for the operating system of your PC bit or bit: Software - DL-Windows V5.

Select Update Lock Firmware from the pop-up menu. Plug in the provided male shunt connector into the yellow wire female connector. In addition, after updating the firmware, manually default the locking device Function 99 alarj described in the programming instructions.